--
-- RFC1213-MIB.html
-- HTML generated by MG-SOFT MIB Explorer Version 2.0 Build 351
-- Monday, November 03, 2003 at 17:27:57

-- HTML group index:
-- RMON2-MIB, RFC1155-SMI, RFC1213-MIB, RMON-MIB, SNMPv2-SMI, 
-- SNMPv2-TC, TOKEN-RING-RMON-MIB.
--

RFC1213-MIB DEFINITIONS ::= BEGIN

	IMPORTS
		internet, mgmt
			FROM RFC1155-SMI;

--
-- Type definitions
--
	DisplayString ::= OCTET STRING

	PhysAddress ::= OCTET STRING

--
-- Node definitions
--
	-- 1.3.6.1.2.1
	mib-2 OBJECT IDENTIFIER ::= { mgmt 1 }

	-- 1.3.6.1.2.1.1
	system OBJECT IDENTIFIER ::= { mib-2 1 }

	-- 1.3.6.1.2.1.1.1
	sysDescr OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A textual description of the entity.  This value
			should include the full name and version
			identification of the system's hardware type,
			software operating-system, and networking
			software.  It is mandatory that this only contain
			printable ASCII characters."
	::= { system 1 }

	-- 1.3.6.1.2.1.1.2
	sysObjectID OBJECT-TYPE
		SYNTAX OBJECT IDENTIFIER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The vendor's authoritative identification of the
			network management subsystem contained in the
			entity.  This value is allocated within the SMI
			enterprises subtree (1.3.6.1.4.1) and provides an
			easy and unambiguous means for determining `what
			kind of box' is being managed.  For example, if
			vendor `Flintstones, Inc.' was assigned the
			subtree 1.3.6.1.4.1.4242, it could assign the
			identifier 1.3.6.1.4.1.4242.1.1 to its `Fred
			Router'."
	::= { system 2 }

	-- 1.3.6.1.2.1.1.3
	sysUpTime OBJECT-TYPE
		SYNTAX TimeTicks
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The time (in hundredths of a second) since the
			network management portion of the system was last
			re-initialized."
	::= { system 3 }

	-- 1.3.6.1.2.1.1.4
	sysContact OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The textual identification of the contact person
			for this managed node, together with information
			on how to contact this person."
	::= { system 4 }

	-- 1.3.6.1.2.1.1.5
	sysName OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An administratively-assigned name for this
			managed node.  By convention, this is the node's
			fully-qualified domain name."
	::= { system 5 }

	-- 1.3.6.1.2.1.1.6
	sysLocation OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The physical location of this node (e.g.,
			`telephone closet, 3rd floor')."
	::= { system 6 }

	-- 1.3.6.1.2.1.1.7
	sysServices OBJECT-TYPE
		SYNTAX INTEGER (0..127)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A value which indicates the set of services that
			this entity primarily offers.
			
			The value is a sum.  This sum initially takes the
			value zero, Then, for each layer, L, in the range
			1 through 7, that this node performs transactions
			for, 2 raised to (L - 1) is added to the sum.  For
			example, a node which performs primarily routing
			functions would have a value of 4 (2^(3-1)).  In
			contrast, a node which is a host offering
			application services would have a value of 72
			(2^(4-1) + 2^(7-1)).  Note that in the context of
			the Internet suite of protocols, values should be
			calculated accordingly:
			
			     layer  functionality
			         1  physical (e.g., repeaters)
			         2  datalink/subnetwork (e.g., bridges)
			         3  internet (e.g., IP gateways)
			         4  end-to-end  (e.g., IP hosts)
			         7  applications (e.g., mail relays)
			
			For systems including OSI protocols, layers 5 and
			6 may also be counted."
	::= { system 7 }

	-- 1.3.6.1.2.1.2
	interfaces OBJECT IDENTIFIER ::= { mib-2 2 }

	-- 1.3.6.1.2.1.2.1
	ifNumber OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of network interfaces (regardless of
			their current state) present on this system."
	::= { interfaces 1 }

	-- 1.3.6.1.2.1.2.2
	ifTable OBJECT-TYPE
		SYNTAX SEQUENCE OF IfEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A list of interface entries.  The number of
			entries is given by the value of ifNumber."
	::= { interfaces 2 }

	-- 1.3.6.1.2.1.2.2.1
	ifEntry OBJECT-TYPE
		SYNTAX IfEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"An interface entry containing objects at the
			subnetwork layer and below for a particular
			interface."
		INDEX { ifIndex } 
	::= { ifTable 1 }


	IfEntry ::= SEQUENCE
		{
		ifIndex INTEGER,
		ifDescr DisplayString,
		ifType INTEGER,
		ifMtu INTEGER,
		ifSpeed Gauge,
		ifPhysAddress PhysAddress,
		ifAdminStatus INTEGER,
		ifOperStatus INTEGER,
		ifLastChange TimeTicks,
		ifInOctets Counter,
		ifInUcastPkts Counter,
		ifInNUcastPkts Counter,
		ifInDiscards Counter,
		ifInErrors Counter,
		ifInUnknownProtos Counter,
		ifOutOctets Counter,
		ifOutUcastPkts Counter,
		ifOutNUcastPkts Counter,
		ifOutDiscards Counter,
		ifOutErrors Counter,
		ifOutQLen Gauge,
		ifSpecific OBJECT IDENTIFIER
		}

	-- 1.3.6.1.2.1.2.2.1.1
	ifIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A unique value for each interface.  Its value
			ranges between 1 and the value of ifNumber.  The
			value for each interface must remain constant at
			least from one re-initialization of the entity's
			network management system to the next re-
			initialization."
	::= { ifEntry 1 }

	-- 1.3.6.1.2.1.2.2.1.2
	ifDescr OBJECT-TYPE
		SYNTAX DisplayString (SIZE (0..255))
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A textual string containing information about the
			interface.  This string should include the name of
			the manufacturer, the product name and the version
			of the hardware interface."
	::= { ifEntry 2 }

	-- 1.3.6.1.2.1.2.2.1.3
	ifType OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			regular1822(2),
			hdh1822(3),
			ddn-x25(4),
			rfc877-x25(5),
			ethernet-csmacd(6),
			iso88023-csmacd(7),
			iso88024-tokenBus(8),
			iso88025-tokenRing(9),
			iso88026-man(10),
			starLan(11),
			proteon-10Mbit(12),
			proteon-80Mbit(13),
			hyperchannel(14),
			fddi(15),
			lapb(16),
			sdlc(17),
			ds1(18),
			e1(19),
			basicISDN(20),
			primaryISDN(21),
			propPointToPointSerial(22),
			ppp(23),
			softwareLoopback(24),
			eon(25),
			ethernet-3Mbit(26),
			nsip(27),
			slip(28),
			ultra(29),
			ds3(30),
			sip(31),
			frame-relay(32)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The type of interface, distinguished according to
			the physical/link protocol(s) immediately `below'
			the network layer in the protocol stack."
	::= { ifEntry 3 }

	-- 1.3.6.1.2.1.2.2.1.4
	ifMtu OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The size of the largest datagram which can be
			sent/received on the interface, specified in
			octets.  For interfaces that are used for
			transmitting network datagrams, this is the size
			of the largest network datagram that can be sent
			on the interface."
	::= { ifEntry 4 }

	-- 1.3.6.1.2.1.2.2.1.5
	ifSpeed OBJECT-TYPE
		SYNTAX Gauge
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"An estimate of the interface's current bandwidth
			in bits per second.  For interfaces which do not
			vary in bandwidth or for those where no accurate
			estimation can be made, this object should contain
			the nominal bandwidth."
	::= { ifEntry 5 }

	-- 1.3.6.1.2.1.2.2.1.6
	ifPhysAddress OBJECT-TYPE
		SYNTAX PhysAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The interface's address at the protocol layer
			immediately `below' the network layer in the
			protocol stack.  For interfaces which do not have
			such an address (e.g., a serial line), this object
			should contain an octet string of zero length."
	::= { ifEntry 6 }

	-- 1.3.6.1.2.1.2.2.1.7
	ifAdminStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			up(1),
			down(2),
			testing(3)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The desired state of the interface.  The
			testing(3) state indicates that no operational
			packets can be passed."
	::= { ifEntry 7 }

	-- 1.3.6.1.2.1.2.2.1.8
	ifOperStatus OBJECT-TYPE
		SYNTAX INTEGER
		{
			up(1),
			down(2),
			testing(3)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The current operational state of the interface.
			The testing(3) state indicates that no operational
			packets can be passed."
	::= { ifEntry 8 }

	-- 1.3.6.1.2.1.2.2.1.9
	ifLastChange OBJECT-TYPE
		SYNTAX TimeTicks
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The value of sysUpTime at the time the interface
			entered its current operational state.  If the
			current state was entered prior to the last re-
			initialization of the local network management
			subsystem, then this object contains a zero
			value."
	::= { ifEntry 9 }

	-- 1.3.6.1.2.1.2.2.1.10
	ifInOctets OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of octets received on the
			interface, including framing characters."
	::= { ifEntry 10 }

	-- 1.3.6.1.2.1.2.2.1.11
	ifInUcastPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of subnetwork-unicast packets
			delivered to a higher-layer protocol."
	::= { ifEntry 11 }

	-- 1.3.6.1.2.1.2.2.1.12
	ifInNUcastPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of non-unicast (i.e., subnetwork-
			broadcast or subnetwork-multicast) packets
			delivered to a higher-layer protocol."
	::= { ifEntry 12 }

	-- 1.3.6.1.2.1.2.2.1.13
	ifInDiscards OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of inbound packets which were chosen
			to be discarded even though no errors had been
			detected to prevent their being deliverable to a
			higher-layer protocol.  One possible reason for
			discarding such a packet could be to free up
			buffer space."
	::= { ifEntry 13 }

	-- 1.3.6.1.2.1.2.2.1.14
	ifInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of inbound packets that contained
			errors preventing them from being deliverable to a
			higher-layer protocol."
	::= { ifEntry 14 }

	-- 1.3.6.1.2.1.2.2.1.15
	ifInUnknownProtos OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of packets received via the interface
			which were discarded because of an unknown or
			unsupported protocol."
	::= { ifEntry 15 }

	-- 1.3.6.1.2.1.2.2.1.16
	ifOutOctets OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of octets transmitted out of the
			interface, including framing characters."
	::= { ifEntry 16 }

	-- 1.3.6.1.2.1.2.2.1.17
	ifOutUcastPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of packets that higher-level
			protocols requested be transmitted to a
			subnetwork-unicast address, including those that
			were discarded or not sent."
	::= { ifEntry 17 }

	-- 1.3.6.1.2.1.2.2.1.18
	ifOutNUcastPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of packets that higher-level
			protocols requested be transmitted to a non-
			unicast (i.e., a subnetwork-broadcast or
			subnetwork-multicast) address, including those
			that were discarded or not sent."
	::= { ifEntry 18 }

	-- 1.3.6.1.2.1.2.2.1.19
	ifOutDiscards OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of outbound packets which were chosen
			to be discarded even though no errors had been
			detected to prevent their being transmitted.  One
			possible reason for discarding such a packet could
			be to free up buffer space."
	::= { ifEntry 19 }

	-- 1.3.6.1.2.1.2.2.1.20
	ifOutErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of outbound packets that could not be
			transmitted because of errors."
	::= { ifEntry 20 }

	-- 1.3.6.1.2.1.2.2.1.21
	ifOutQLen OBJECT-TYPE
		SYNTAX Gauge
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The length of the output packet queue (in
			packets)."
	::= { ifEntry 21 }

	-- 1.3.6.1.2.1.2.2.1.22
	ifSpecific OBJECT-TYPE
		SYNTAX OBJECT IDENTIFIER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A reference to MIB definitions specific to the
			particular media being used to realize the
			interface.  For example, if the interface is
			realized by an ethernet, then the value of this
			object refers to a document defining objects
			specific to ethernet.  If this information is not
			present, its value should be set to the OBJECT
			IDENTIFIER { 0 0 }, which is a syntatically valid
			object identifier, and any conformant
			implementation of ASN.1 and BER must be able to
			generate and recognize this value."
	::= { ifEntry 22 }

	-- 1.3.6.1.2.1.3
	at OBJECT IDENTIFIER ::= { mib-2 3 }

	-- 1.3.6.1.2.1.3.1
	atTable OBJECT-TYPE
		SYNTAX SEQUENCE OF AtEntry
		ACCESS not-accessible
		STATUS deprecated
		DESCRIPTION
			"The Address Translation tables contain the
			NetworkAddress to `physical' address equivalences.
			Some interfaces do not use translation tables for
			determining address equivalences (e.g., DDN-X.25
			has an algorithmic method); if all interfaces are
			of this type, then the Address Translation table
			is empty, i.e., has zero entries."
	::= { at 1 }

	-- 1.3.6.1.2.1.3.1.1
	atEntry OBJECT-TYPE
		SYNTAX AtEntry
		ACCESS not-accessible
		STATUS deprecated
		DESCRIPTION
			"Each entry contains one NetworkAddress to
			`physical' address equivalence."
		INDEX { atIfIndex, atNetAddress } 
	::= { atTable 1 }


	AtEntry ::= SEQUENCE
		{
		atIfIndex INTEGER,
		atPhysAddress PhysAddress,
		atNetAddress NetworkAddress
		}

	-- 1.3.6.1.2.1.3.1.1.1
	atIfIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS deprecated
		DESCRIPTION
			"The interface on which this entry's equivalence
			is effective.  The interface identified by a
			particular value of this index is the same
			interface as identified by the same value of
			ifIndex."
	::= { atEntry 1 }

	-- 1.3.6.1.2.1.3.1.1.2
	atPhysAddress OBJECT-TYPE
		SYNTAX PhysAddress
		ACCESS read-write
		STATUS deprecated
		DESCRIPTION
			"The media-dependent `physical' address.
			
			Setting this object to a null string (one of zero
			length) has the effect of invaliding the
			corresponding entry in the atTable object.  That
			is, it effectively dissasociates the interface
			identified with said entry from the mapping
			identified with said entry.  It is an
			implementation-specific matter as to whether the
			agent removes an invalidated entry from the table.
			Accordingly, management stations must be prepared
			to receive tabular information from agents that
			corresponds to entries not currently in use.
			Proper interpretation of such entries requires
			examination of the relevant atPhysAddress object."
	::= { atEntry 2 }

	-- 1.3.6.1.2.1.3.1.1.3
	atNetAddress OBJECT-TYPE
		SYNTAX NetworkAddress
		ACCESS read-write
		STATUS deprecated
		DESCRIPTION
			"The NetworkAddress (e.g., the IP address)
			corresponding to the media-dependent `physical'
			address."
	::= { atEntry 3 }

	-- 1.3.6.1.2.1.4
	ip OBJECT IDENTIFIER ::= { mib-2 4 }

	-- 1.3.6.1.2.1.4.1
	ipForwarding OBJECT-TYPE
		SYNTAX INTEGER
		{
			forwarding(1),
			not-forwarding(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The indication of whether this entity is acting
			as an IP gateway in respect to the forwarding of
			datagrams received by, but not addressed to, this
			entity.  IP gateways forward datagrams.  IP hosts
			do not (except those source-routed via the host).
			
			Note that for some managed nodes, this object may
			take on only a subset of the values possible.
			Accordingly, it is appropriate for an agent to
			return a `badValue' response if a management
			station attempts to change this object to an
			inappropriate value."
	::= { ip 1 }

	-- 1.3.6.1.2.1.4.2
	ipDefaultTTL OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The default value inserted into the Time-To-Live
			field of the IP header of datagrams originated at
			this entity, whenever a TTL value is not supplied
			by the transport layer protocol."
	::= { ip 2 }

	-- 1.3.6.1.2.1.4.3
	ipInReceives OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of input datagrams received from
			interfaces, including those received in error."
	::= { ip 3 }

	-- 1.3.6.1.2.1.4.4
	ipInHdrErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of input datagrams discarded due to
			errors in their IP headers, including bad
			checksums, version number mismatch, other format
			errors, time-to-live exceeded, errors discovered
			in processing their IP options, etc."
	::= { ip 4 }

	-- 1.3.6.1.2.1.4.5
	ipInAddrErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of input datagrams discarded because
			the IP address in their IP header's destination
			field was not a valid address to be received at
			this entity.  This count includes invalid
			addresses (e.g., 0.0.0.0) and addresses of
			unsupported Classes (e.g., Class E).  For entities
			which are not IP Gateways and therefore do not
			forward datagrams, this counter includes datagrams
			discarded because the destination address was not
			a local address."
	::= { ip 5 }

	-- 1.3.6.1.2.1.4.6
	ipForwDatagrams OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of input datagrams for which this
			entity was not their final IP destination, as a
			result of which an attempt was made to find a
			route to forward them to that final destination.
			In entities which do not act as IP Gateways, this
			counter will include only those packets which were
			Source-Routed via this entity, and the Source-
			Route option processing was successful."
	::= { ip 6 }

	-- 1.3.6.1.2.1.4.7
	ipInUnknownProtos OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of locally-addressed datagrams
			received successfully but discarded because of an
			unknown or unsupported protocol."
	::= { ip 7 }

	-- 1.3.6.1.2.1.4.8
	ipInDiscards OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of input IP datagrams for which no
			problems were encountered to prevent their
			continued processing, but which were discarded
			(e.g., for lack of buffer space).  Note that this
			counter does not include any datagrams discarded
			while awaiting re-assembly."
	::= { ip 8 }

	-- 1.3.6.1.2.1.4.9
	ipInDelivers OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of input datagrams successfully
			delivered to IP user-protocols (including ICMP)."
	::= { ip 9 }

	-- 1.3.6.1.2.1.4.10
	ipOutRequests OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of IP datagrams which local IP
			user-protocols (including ICMP) supplied to IP in
			requests for transmission.  Note that this counter
			does not include any datagrams counted in
			ipForwDatagrams."
	::= { ip 10 }

	-- 1.3.6.1.2.1.4.11
	ipOutDiscards OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of output IP datagrams for which no
			problem was encountered to prevent their
			transmission to their destination, but which were
			discarded (e.g., for lack of buffer space).  Note
			that this counter would include datagrams counted
			in ipForwDatagrams if any such packets met this
			(discretionary) discard criterion."
	::= { ip 11 }

	-- 1.3.6.1.2.1.4.12
	ipOutNoRoutes OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP datagrams discarded because no
			route could be found to transmit them to their
			destination.  Note that this counter includes any
			packets counted in ipForwDatagrams which meet this
			`no-route' criterion.  Note that this includes any
			datagarms which a host cannot route because all of
			its default gateways are down."
	::= { ip 12 }

	-- 1.3.6.1.2.1.4.13
	ipReasmTimeout OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The maximum number of seconds which received
			fragments are held while they are awaiting
			reassembly at this entity."
	::= { ip 13 }

	-- 1.3.6.1.2.1.4.14
	ipReasmReqds OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP fragments received which needed
			to be reassembled at this entity."
	::= { ip 14 }

	-- 1.3.6.1.2.1.4.15
	ipReasmOKs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP datagrams successfully re-
			assembled."
	::= { ip 15 }

	-- 1.3.6.1.2.1.4.16
	ipReasmFails OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of failures detected by the IP re-
			assembly algorithm (for whatever reason: timed
			out, errors, etc).  Note that this is not
			necessarily a count of discarded IP fragments
			since some algorithms (notably the algorithm in
			RFC 815) can lose track of the number of fragments
			by combining them as they are received."
	::= { ip 16 }

	-- 1.3.6.1.2.1.4.17
	ipFragOKs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP datagrams that have been
			successfully fragmented at this entity."
	::= { ip 17 }

	-- 1.3.6.1.2.1.4.18
	ipFragFails OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP datagrams that have been
			discarded because they needed to be fragmented at
			this entity but could not be, e.g., because their
			Don't Fragment flag was set."
	::= { ip 18 }

	-- 1.3.6.1.2.1.4.19
	ipFragCreates OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of IP datagram fragments that have
			been generated as a result of fragmentation at
			this entity."
	::= { ip 19 }

	-- 1.3.6.1.2.1.4.20
	ipAddrTable OBJECT-TYPE
		SYNTAX SEQUENCE OF IpAddrEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"The table of addressing information relevant to
			this entity's IP addresses."
	::= { ip 20 }

	-- 1.3.6.1.2.1.4.20.1
	ipAddrEntry OBJECT-TYPE
		SYNTAX IpAddrEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"The addressing information for one of this
			entity's IP addresses."
		INDEX { ipAdEntAddr } 
	::= { ipAddrTable 1 }


	IpAddrEntry ::= SEQUENCE
		{
		ipAdEntAddr IpAddress,
		ipAdEntIfIndex INTEGER,
		ipAdEntNetMask IpAddress,
		ipAdEntBcastAddr INTEGER,
		ipAdEntReasmMaxSize INTEGER
		}

	-- 1.3.6.1.2.1.4.20.1.1
	ipAdEntAddr OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The IP address to which this entry's addressing
			information pertains."
	::= { ipAddrEntry 1 }

	-- 1.3.6.1.2.1.4.20.1.2
	ipAdEntIfIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The index value which uniquely identifies the
			interface to which this entry is applicable.  The
			interface identified by a particular value of this
			index is the same interface as identified by the
			same value of ifIndex."
	::= { ipAddrEntry 2 }

	-- 1.3.6.1.2.1.4.20.1.3
	ipAdEntNetMask OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The subnet mask associated with the IP address of
			this entry.  The value of the mask is an IP
			address with all the network bits set to 1 and all
			the hosts bits set to 0."
	::= { ipAddrEntry 3 }

	-- 1.3.6.1.2.1.4.20.1.4
	ipAdEntBcastAddr OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The value of the least-significant bit in the IP
			broadcast address used for sending datagrams on
			the (logical) interface associated with the IP
			address of this entry.  For example, when the
			Internet standard all-ones broadcast address is
			used, the value will be 1.  This value applies to
			both the subnet and network broadcasts addresses
			used by the entity on this (logical) interface."
	::= { ipAddrEntry 4 }

	-- 1.3.6.1.2.1.4.20.1.5
	ipAdEntReasmMaxSize OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The size of the largest IP datagram which this
			entity can re-assemble from incoming IP fragmented
			datagrams received on this interface."
	::= { ipAddrEntry 5 }

	-- 1.3.6.1.2.1.4.21
	ipRouteTable OBJECT-TYPE
		SYNTAX SEQUENCE OF IpRouteEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"This entity's IP Routing table."
	::= { ip 21 }

	-- 1.3.6.1.2.1.4.21.1
	ipRouteEntry OBJECT-TYPE
		SYNTAX IpRouteEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A route to a particular destination."
		INDEX { ipRouteDest } 
	::= { ipRouteTable 1 }


	IpRouteEntry ::= SEQUENCE
		{
		ipRouteDest IpAddress,
		ipRouteIfIndex INTEGER,
		ipRouteMetric1 INTEGER,
		ipRouteMetric2 INTEGER,
		ipRouteMetric3 INTEGER,
		ipRouteMetric4 INTEGER,
		ipRouteNextHop IpAddress,
		ipRouteType INTEGER,
		ipRouteProto INTEGER,
		ipRouteAge INTEGER,
		ipRouteMask IpAddress,
		ipRouteMetric5 INTEGER,
		ipRouteInfo OBJECT IDENTIFIER
		}

	-- 1.3.6.1.2.1.4.21.1.1
	ipRouteDest OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The destination IP address of this route.  An
			entry with a value of 0.0.0.0 is considered a
			default route.  Multiple routes to a single
			destination can appear in the table, but access to
			such multiple entries is dependent on the table-
			access mechanisms defined by the network
			management protocol in use."
	::= { ipRouteEntry 1 }

	-- 1.3.6.1.2.1.4.21.1.2
	ipRouteIfIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The index value which uniquely identifies the
			local interface through which the next hop of this
			route should be reached.  The interface identified
			by a particular value of this index is the same
			interface as identified by the same value of
			ifIndex."
	::= { ipRouteEntry 2 }

	-- 1.3.6.1.2.1.4.21.1.3
	ipRouteMetric1 OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The primary routing metric for this route.  The
			semantics of this metric are determined by the
			routing-protocol specified in the route's
			ipRouteProto value.  If this metric is not used,
			its value should be set to -1."
	::= { ipRouteEntry 3 }

	-- 1.3.6.1.2.1.4.21.1.4
	ipRouteMetric2 OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An alternate routing metric for this route.  The
			semantics of this metric are determined by the
			routing-protocol specified in the route's
			ipRouteProto value.  If this metric is not used,
			its value should be set to -1."
	::= { ipRouteEntry 4 }

	-- 1.3.6.1.2.1.4.21.1.5
	ipRouteMetric3 OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An alternate routing metric for this route.  The
			semantics of this metric are determined by the
			routing-protocol specified in the route's
			ipRouteProto value.  If this metric is not used,
			its value should be set to -1."
	::= { ipRouteEntry 5 }

	-- 1.3.6.1.2.1.4.21.1.6
	ipRouteMetric4 OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An alternate routing metric for this route.  The
			semantics of this metric are determined by the
			routing-protocol specified in the route's
			ipRouteProto value.  If this metric is not used,
			its value should be set to -1."
	::= { ipRouteEntry 6 }

	-- 1.3.6.1.2.1.4.21.1.7
	ipRouteNextHop OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IP address of the next hop of this route.
			(In the case of a route bound to an interface
			which is realized via a broadcast media, the value
			of this field is the agent's IP address on that
			interface.)"
	::= { ipRouteEntry 7 }

	-- 1.3.6.1.2.1.4.21.1.8
	ipRouteType OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			invalid(2),
			direct(3),
			indirect(4)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The type of route.  Note that the values
			direct(3) and indirect(4) refer to the notion of
			direct and indirect routing in the IP
			architecture.
			
			Setting this object to the value invalid(2) has
			the effect of invalidating the corresponding entry
			in the ipRouteTable object.  That is, it
			effectively dissasociates the destination
			identified with said entry from the route
			identified with said entry.  It is an
			implementation-specific matter as to whether the
			agent removes an invalidated entry from the table.
			Accordingly, management stations must be prepared
			to receive tabular information from agents that
			corresponds to entries not currently in use.
			Proper interpretation of such entries requires
			examination of the relevant ipRouteType object."
	::= { ipRouteEntry 8 }

	-- 1.3.6.1.2.1.4.21.1.9
	ipRouteProto OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			local(2),
			netmgmt(3),
			icmp(4),
			egp(5),
			ggp(6),
			hello(7),
			rip(8),
			is-is(9),
			es-is(10),
			ciscoIgrp(11),
			bbnSpfIgp(12),
			ospf(13),
			bgp(14)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The routing mechanism via which this route was
			learned.  Inclusion of values for gateway routing
			protocols is not intended to imply that hosts
			should support those protocols."
	::= { ipRouteEntry 9 }

	-- 1.3.6.1.2.1.4.21.1.10
	ipRouteAge OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The number of seconds since this route was last
			updated or otherwise determined to be correct.
			Note that no semantics of `too old' can be implied
			except through knowledge of the routing protocol
			by which the route was learned."
	::= { ipRouteEntry 10 }

	-- 1.3.6.1.2.1.4.21.1.11
	ipRouteMask OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Indicate the mask to be logical-ANDed with the
			destination address before being compared to the
			value in the ipRouteDest field.  For those systems
			that do not support arbitrary subnet masks, an
			agent constructs the value of the ipRouteMask by
			determining whether the value of the correspondent
			ipRouteDest field belong to a class-A, B, or C
			network, and then using one of:
			
			     mask           network
			     255.0.0.0      class-A
			     255.255.0.0    class-B
			     255.255.255.0  class-C
			
			If the value of the ipRouteDest is 0.0.0.0 (a
			default route), then the mask value is also
			0.0.0.0.  It should be noted that all IP routing
			subsystems implicitly use this mechanism."
	::= { ipRouteEntry 11 }

	-- 1.3.6.1.2.1.4.21.1.12
	ipRouteMetric5 OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"An alternate routing metric for this route.  The
			semantics of this metric are determined by the
			routing-protocol specified in the route's
			ipRouteProto value.  If this metric is not used,
			its value should be set to -1."
	::= { ipRouteEntry 12 }

	-- 1.3.6.1.2.1.4.21.1.13
	ipRouteInfo OBJECT-TYPE
		SYNTAX OBJECT IDENTIFIER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"A reference to MIB definitions specific to the
			particular routing protocol which is responsible
			for this route, as determined by the value
			specified in the route's ipRouteProto value.  If
			this information is not present, its value should
			be set to the OBJECT IDENTIFIER { 0 0 }, which is
			a syntatically valid object identifier, and any
			conformant implementation of ASN.1 and BER must be
			able to generate and recognize this value."
	::= { ipRouteEntry 13 }

	-- 1.3.6.1.2.1.4.22
	ipNetToMediaTable OBJECT-TYPE
		SYNTAX SEQUENCE OF IpNetToMediaEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"The IP Address Translation table used for mapping
			from IP addresses to physical addresses."
	::= { ip 22 }

	-- 1.3.6.1.2.1.4.22.1
	ipNetToMediaEntry OBJECT-TYPE
		SYNTAX IpNetToMediaEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Each entry contains one IpAddress to `physical'
			address equivalence."
		INDEX { ipNetToMediaIfIndex, ipNetToMediaNetAddress } 
	::= { ipNetToMediaTable 1 }


	IpNetToMediaEntry ::= SEQUENCE
		{
		ipNetToMediaIfIndex INTEGER,
		ipNetToMediaPhysAddress PhysAddress,
		ipNetToMediaNetAddress IpAddress,
		ipNetToMediaType INTEGER
		}

	-- 1.3.6.1.2.1.4.22.1.1
	ipNetToMediaIfIndex OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The interface on which this entry's equivalence
			is effective.  The interface identified by a
			particular value of this index is the same
			interface as identified by the same value of
			ifIndex."
	::= { ipNetToMediaEntry 1 }

	-- 1.3.6.1.2.1.4.22.1.2
	ipNetToMediaPhysAddress OBJECT-TYPE
		SYNTAX PhysAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The media-dependent `physical' address."
	::= { ipNetToMediaEntry 2 }

	-- 1.3.6.1.2.1.4.22.1.3
	ipNetToMediaNetAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The IpAddress corresponding to the media-
			dependent `physical' address."
	::= { ipNetToMediaEntry 3 }

	-- 1.3.6.1.2.1.4.22.1.4
	ipNetToMediaType OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			invalid(2),
			dynamic(3),
			static(4)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The type of mapping.
			
			Setting this object to the value invalid(2) has
			the effect of invalidating the corresponding entry
			in the ipNetToMediaTable.  That is, it effectively
			dissasociates the interface identified with said
			entry from the mapping identified with said entry.
			It is an implementation-specific matter as to
			whether the agent removes an invalidated entry
			from the table.  Accordingly, management stations
			must be prepared to receive tabular information
			from agents that corresponds to entries not
			currently in use.  Proper interpretation of such
			entries requires examination of the relevant
			ipNetToMediaType object."
	::= { ipNetToMediaEntry 4 }

	-- 1.3.6.1.2.1.4.23
	ipRoutingDiscards OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of routing entries which were chosen
			to be discarded even though they are valid.  One
			possible reason for discarding such an entry could
			be to free-up buffer space for other routing
			entries."
	::= { ip 23 }

	-- 1.3.6.1.2.1.5
	icmp OBJECT IDENTIFIER ::= { mib-2 5 }

	-- 1.3.6.1.2.1.5.1
	icmpInMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of ICMP messages which the
			entity received.  Note that this counter includes
			all those counted by icmpInErrors."
	::= { icmp 1 }

	-- 1.3.6.1.2.1.5.2
	icmpInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP messages which the entity
			received but determined as having ICMP-specific
			errors (bad ICMP checksums, bad length, etc.)."
	::= { icmp 2 }

	-- 1.3.6.1.2.1.5.3
	icmpInDestUnreachs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Destination Unreachable
			messages received."
	::= { icmp 3 }

	-- 1.3.6.1.2.1.5.4
	icmpInTimeExcds OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Time Exceeded messages
			received."
	::= { icmp 4 }

	-- 1.3.6.1.2.1.5.5
	icmpInParmProbs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Parameter Problem messages
			received."
	::= { icmp 5 }

	-- 1.3.6.1.2.1.5.6
	icmpInSrcQuenchs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Source Quench messages
			received."
	::= { icmp 6 }

	-- 1.3.6.1.2.1.5.7
	icmpInRedirects OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Redirect messages received."
	::= { icmp 7 }

	-- 1.3.6.1.2.1.5.8
	icmpInEchos OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Echo (request) messages
			received."
	::= { icmp 8 }

	-- 1.3.6.1.2.1.5.9
	icmpInEchoReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Echo Reply messages received."
	::= { icmp 9 }

	-- 1.3.6.1.2.1.5.10
	icmpInTimestamps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Timestamp (request) messages
			received."
	::= { icmp 10 }

	-- 1.3.6.1.2.1.5.11
	icmpInTimestampReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Timestamp Reply messages
			received."
	::= { icmp 11 }

	-- 1.3.6.1.2.1.5.12
	icmpInAddrMasks OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Request messages
			received."
	::= { icmp 12 }

	-- 1.3.6.1.2.1.5.13
	icmpInAddrMaskReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Reply messages
			received."
	::= { icmp 13 }

	-- 1.3.6.1.2.1.5.14
	icmpOutMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of ICMP messages which this
			entity attempted to send.  Note that this counter
			includes all those counted by icmpOutErrors."
	::= { icmp 14 }

	-- 1.3.6.1.2.1.5.15
	icmpOutErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP messages which this entity did
			not send due to problems discovered within ICMP
			such as a lack of buffers.  This value should not
			include errors discovered outside the ICMP layer
			such as the inability of IP to route the resultant
			datagram.  In some implementations there may be no
			types of error which contribute to this counter's
			value."
	::= { icmp 15 }

	-- 1.3.6.1.2.1.5.16
	icmpOutDestUnreachs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Destination Unreachable
			messages sent."
	::= { icmp 16 }

	-- 1.3.6.1.2.1.5.17
	icmpOutTimeExcds OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Time Exceeded messages sent."
	::= { icmp 17 }

	-- 1.3.6.1.2.1.5.18
	icmpOutParmProbs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Parameter Problem messages
			sent."
	::= { icmp 18 }

	-- 1.3.6.1.2.1.5.19
	icmpOutSrcQuenchs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Source Quench messages sent."
	::= { icmp 19 }

	-- 1.3.6.1.2.1.5.20
	icmpOutRedirects OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Redirect messages sent.  For a
			host, this object will always be zero, since hosts
			do not send redirects."
	::= { icmp 20 }

	-- 1.3.6.1.2.1.5.21
	icmpOutEchos OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Echo (request) messages sent."
	::= { icmp 21 }

	-- 1.3.6.1.2.1.5.22
	icmpOutEchoReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Echo Reply messages sent."
	::= { icmp 22 }

	-- 1.3.6.1.2.1.5.23
	icmpOutTimestamps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Timestamp (request) messages
			sent."
	::= { icmp 23 }

	-- 1.3.6.1.2.1.5.24
	icmpOutTimestampReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Timestamp Reply messages
			sent."
	::= { icmp 24 }

	-- 1.3.6.1.2.1.5.25
	icmpOutAddrMasks OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Request messages
			sent."
	::= { icmp 25 }

	-- 1.3.6.1.2.1.5.26
	icmpOutAddrMaskReps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of ICMP Address Mask Reply messages
			sent."
	::= { icmp 26 }

	-- 1.3.6.1.2.1.6
	tcp OBJECT IDENTIFIER ::= { mib-2 6 }

	-- 1.3.6.1.2.1.6.1
	tcpRtoAlgorithm OBJECT-TYPE
		SYNTAX INTEGER
		{
			other(1),
			constant(2),
			rsre(3),
			vanj(4)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The algorithm used to determine the timeout value
			used for retransmitting unacknowledged octets."
	::= { tcp 1 }

	-- 1.3.6.1.2.1.6.2
	tcpRtoMin OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The minimum value permitted by a TCP
			implementation for the retransmission timeout,
			measured in milliseconds.  More refined semantics
			for objects of this type depend upon the algorithm
			used to determine the retransmission timeout.  In
			particular, when the timeout algorithm is rsre(3),
			an object of this type has the semantics of the
			LBOUND quantity described in RFC 793."
	::= { tcp 2 }

	-- 1.3.6.1.2.1.6.3
	tcpRtoMax OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The maximum value permitted by a TCP
			implementation for the retransmission timeout,
			measured in milliseconds.  More refined semantics
			for objects of this type depend upon the algorithm
			used to determine the retransmission timeout.  In
			particular, when the timeout algorithm is rsre(3),
			an object of this type has the semantics of the
			UBOUND quantity described in RFC 793."
	::= { tcp 3 }

	-- 1.3.6.1.2.1.6.4
	tcpMaxConn OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The limit on the total number of TCP connections
			the entity can support.  In entities where the
			maximum number of connections is dynamic, this
			object should contain the value -1."
	::= { tcp 4 }

	-- 1.3.6.1.2.1.6.5
	tcpActiveOpens OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the SYN-SENT state from the
			CLOSED state."
	::= { tcp 5 }

	-- 1.3.6.1.2.1.6.6
	tcpPassiveOpens OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the SYN-RCVD state from the
			LISTEN state."
	::= { tcp 6 }

	-- 1.3.6.1.2.1.6.7
	tcpAttemptFails OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the CLOSED state from either
			the SYN-SENT state or the SYN-RCVD state, plus the
			number of times TCP connections have made a direct
			transition to the LISTEN state from the SYN-RCVD
			state."
	::= { tcp 7 }

	-- 1.3.6.1.2.1.6.8
	tcpEstabResets OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of times TCP connections have made a
			direct transition to the CLOSED state from either
			the ESTABLISHED state or the CLOSE-WAIT state."
	::= { tcp 8 }

	-- 1.3.6.1.2.1.6.9
	tcpCurrEstab OBJECT-TYPE
		SYNTAX Gauge
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of TCP connections for which the
			current state is either ESTABLISHED or CLOSE-
			WAIT."
	::= { tcp 9 }

	-- 1.3.6.1.2.1.6.10
	tcpInSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments received, including
			those received in error.  This count includes
			segments received on currently established
			connections."
	::= { tcp 10 }

	-- 1.3.6.1.2.1.6.11
	tcpOutSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments sent, including
			those on current connections but excluding those
			containing only retransmitted octets."
	::= { tcp 11 }

	-- 1.3.6.1.2.1.6.12
	tcpRetransSegs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments retransmitted - that
			is, the number of TCP segments transmitted
			containing one or more previously transmitted
			octets."
	::= { tcp 12 }

	-- 1.3.6.1.2.1.6.13
	tcpConnTable OBJECT-TYPE
		SYNTAX SEQUENCE OF TcpConnEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing TCP connection-specific
			information."
	::= { tcp 13 }

	-- 1.3.6.1.2.1.6.13.1
	tcpConnEntry OBJECT-TYPE
		SYNTAX TcpConnEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about a particular current TCP
			connection.  An object of this type is transient,
			in that it ceases to exist when (or soon after)
			the connection makes the transition to the CLOSED
			state."
		INDEX { tcpConnLocalAddress, tcpConnLocalPort, tcpConnRemAddress, 
		tcpConnRemPort } 
	::= { tcpConnTable 1 }


	TcpConnEntry ::= SEQUENCE
		{
		tcpConnState INTEGER,
		tcpConnLocalAddress IpAddress,
		tcpConnLocalPort INTEGER,
		tcpConnRemAddress IpAddress,
		tcpConnRemPort INTEGER
		}

	-- 1.3.6.1.2.1.6.13.1.1
	tcpConnState OBJECT-TYPE
		SYNTAX INTEGER
		{
			closed(1),
			listen(2),
			synSent(3),
			synReceived(4),
			established(5),
			finWait1(6),
			finWait2(7),
			closeWait(8),
			lastAck(9),
			closing(10),
			timeWait(11),
			deleteTCB(12)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"The state of this TCP connection.
			
			The only value which may be set by a management
			station is deleteTCB(12).  Accordingly, it is
			appropriate for an agent to return a `badValue'
			response if a management station attempts to set
			this object to any other value.
			
			If a management station sets this object to the
			value deleteTCB(12), then this has the effect of
			deleting the TCB (as defined in RFC 793) of the
			corresponding connection on the managed node,
			resulting in immediate termination of the
			connection.
			
			As an implementation-specific option, a RST
			segment may be sent from the managed node to the
			other TCP endpoint (note however that RST segments
			are not sent reliably)."
	::= { tcpConnEntry 1 }

	-- 1.3.6.1.2.1.6.13.1.2
	tcpConnLocalAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local IP address for this TCP connection.  In
			the case of a connection in the listen state which
			is willing to accept connections for any IP
			interface associated with the node, the value
			0.0.0.0 is used."
	::= { tcpConnEntry 2 }

	-- 1.3.6.1.2.1.6.13.1.3
	tcpConnLocalPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local port number for this TCP connection."
	::= { tcpConnEntry 3 }

	-- 1.3.6.1.2.1.6.13.1.4
	tcpConnRemAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The remote IP address for this TCP connection."
	::= { tcpConnEntry 4 }

	-- 1.3.6.1.2.1.6.13.1.5
	tcpConnRemPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The remote port number for this TCP connection."
	::= { tcpConnEntry 5 }

	-- 1.3.6.1.2.1.6.14
	tcpInErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of segments received in error
			(e.g., bad TCP checksums)."
	::= { tcp 14 }

	-- 1.3.6.1.2.1.6.15
	tcpOutRsts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of TCP segments sent containing the
			RST flag."
	::= { tcp 15 }

	-- 1.3.6.1.2.1.7
	udp OBJECT IDENTIFIER ::= { mib-2 7 }

	-- 1.3.6.1.2.1.7.1
	udpInDatagrams OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of UDP datagrams delivered to
			UDP users."
	::= { udp 1 }

	-- 1.3.6.1.2.1.7.2
	udpNoPorts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of received UDP datagrams for
			which there was no application at the destination
			port."
	::= { udp 2 }

	-- 1.3.6.1.2.1.7.3
	udpInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of received UDP datagrams that could
			not be delivered for reasons other than the lack
			of an application at the destination port."
	::= { udp 3 }

	-- 1.3.6.1.2.1.7.4
	udpOutDatagrams OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of UDP datagrams sent from this
			entity."
	::= { udp 4 }

	-- 1.3.6.1.2.1.7.5
	udpTable OBJECT-TYPE
		SYNTAX SEQUENCE OF UdpEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"A table containing UDP listener information."
	::= { udp 5 }

	-- 1.3.6.1.2.1.7.5.1
	udpEntry OBJECT-TYPE
		SYNTAX UdpEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about a particular current UDP
			listener."
		INDEX { udpLocalAddress, udpLocalPort } 
	::= { udpTable 1 }


	UdpEntry ::= SEQUENCE
		{
		udpLocalAddress IpAddress,
		udpLocalPort INTEGER
		}

	-- 1.3.6.1.2.1.7.5.1.1
	udpLocalAddress OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local IP address for this UDP listener.  In
			the case of a UDP listener which is willing to
			accept datagrams for any IP interface associated
			with the node, the value 0.0.0.0 is used."
	::= { udpEntry 1 }

	-- 1.3.6.1.2.1.7.5.1.2
	udpLocalPort OBJECT-TYPE
		SYNTAX INTEGER (0..65535)
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The local port number for this UDP listener."
	::= { udpEntry 2 }

	-- 1.3.6.1.2.1.8
	egp OBJECT IDENTIFIER ::= { mib-2 8 }

	-- 1.3.6.1.2.1.8.1
	egpInMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received without
			error."
	::= { egp 1 }

	-- 1.3.6.1.2.1.8.2
	egpInErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received that proved
			to be in error."
	::= { egp 2 }

	-- 1.3.6.1.2.1.8.3
	egpOutMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of locally generated EGP
			messages."
	::= { egp 3 }

	-- 1.3.6.1.2.1.8.4
	egpOutErrors OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of locally generated EGP messages not
			sent due to resource limitations within an EGP
			entity."
	::= { egp 4 }

	-- 1.3.6.1.2.1.8.5
	egpNeighTable OBJECT-TYPE
		SYNTAX SEQUENCE OF EgpNeighEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"The EGP neighbor table."
	::= { egp 5 }

	-- 1.3.6.1.2.1.8.5.1
	egpNeighEntry OBJECT-TYPE
		SYNTAX EgpNeighEntry
		ACCESS not-accessible
		STATUS mandatory
		DESCRIPTION
			"Information about this entity's relationship with
			a particular EGP neighbor."
		INDEX { egpNeighAddr } 
	::= { egpNeighTable 1 }


	EgpNeighEntry ::= SEQUENCE
		{
		egpNeighState INTEGER,
		egpNeighAddr IpAddress,
		egpNeighAs INTEGER,
		egpNeighInMsgs Counter,
		egpNeighInErrs Counter,
		egpNeighOutMsgs Counter,
		egpNeighOutErrs Counter,
		egpNeighInErrMsgs Counter,
		egpNeighOutErrMsgs Counter,
		egpNeighStateUps Counter,
		egpNeighStateDowns Counter,
		egpNeighIntervalHello INTEGER,
		egpNeighIntervalPoll INTEGER,
		egpNeighMode INTEGER,
		egpNeighEventTrigger INTEGER
		}

	-- 1.3.6.1.2.1.8.5.1.1
	egpNeighState OBJECT-TYPE
		SYNTAX INTEGER
		{
			idle(1),
			acquisition(2),
			down(3),
			up(4),
			cease(5)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The EGP state of the local system with respect to
			this entry's EGP neighbor.  Each EGP state is
			represented by a value that is one greater than
			the numerical value associated with said state in
			RFC 904."
	::= { egpNeighEntry 1 }

	-- 1.3.6.1.2.1.8.5.1.2
	egpNeighAddr OBJECT-TYPE
		SYNTAX IpAddress
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The IP address of this entry's EGP neighbor."
	::= { egpNeighEntry 2 }

	-- 1.3.6.1.2.1.8.5.1.3
	egpNeighAs OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The autonomous system of this EGP peer.  Zero
			should be specified if the autonomous system
			number of the neighbor is not yet known."
	::= { egpNeighEntry 3 }

	-- 1.3.6.1.2.1.8.5.1.4
	egpNeighInMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received without error
			from this EGP peer."
	::= { egpNeighEntry 4 }

	-- 1.3.6.1.2.1.8.5.1.5
	egpNeighInErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP messages received from this EGP
			peer that proved to be in error (e.g., bad EGP
			checksum)."
	::= { egpNeighEntry 5 }

	-- 1.3.6.1.2.1.8.5.1.6
	egpNeighOutMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of locally generated EGP messages to
			this EGP peer."
	::= { egpNeighEntry 6 }

	-- 1.3.6.1.2.1.8.5.1.7
	egpNeighOutErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of locally generated EGP messages not
			sent to this EGP peer due to resource limitations
			within an EGP entity."
	::= { egpNeighEntry 7 }

	-- 1.3.6.1.2.1.8.5.1.8
	egpNeighInErrMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP-defined error messages received
			from this EGP peer."
	::= { egpNeighEntry 8 }

	-- 1.3.6.1.2.1.8.5.1.9
	egpNeighOutErrMsgs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP-defined error messages sent to
			this EGP peer."
	::= { egpNeighEntry 9 }

	-- 1.3.6.1.2.1.8.5.1.10
	egpNeighStateUps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP state transitions to the UP
			state with this EGP peer."
	::= { egpNeighEntry 10 }

	-- 1.3.6.1.2.1.8.5.1.11
	egpNeighStateDowns OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The number of EGP state transitions from the UP
			state to any other state with this EGP peer."
	::= { egpNeighEntry 11 }

	-- 1.3.6.1.2.1.8.5.1.12
	egpNeighIntervalHello OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The interval between EGP Hello command
			retransmissions (in hundredths of a second).  This
			represents the t1 timer as defined in RFC 904."
	::= { egpNeighEntry 12 }

	-- 1.3.6.1.2.1.8.5.1.13
	egpNeighIntervalPoll OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The interval between EGP poll command
			retransmissions (in hundredths of a second).  This
			represents the t3 timer as defined in RFC 904."
	::= { egpNeighEntry 13 }

	-- 1.3.6.1.2.1.8.5.1.14
	egpNeighMode OBJECT-TYPE
		SYNTAX INTEGER
		{
			active(1),
			passive(2)
		}
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The polling mode of this EGP entity, either
			passive or active."
	::= { egpNeighEntry 14 }

	-- 1.3.6.1.2.1.8.5.1.15
	egpNeighEventTrigger OBJECT-TYPE
		SYNTAX INTEGER
		{
			start(1),
			stop(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"A control variable used to trigger operator-
			initiated Start and Stop events.  When read, this
			variable always returns the most recent value that
			egpNeighEventTrigger was set to.  If it has not
			been set since the last initialization of the
			network management subsystem on the node, it
			returns a value of `stop'.
			
			When set, this variable causes a Start or Stop
			event on the specified neighbor, as specified on
			pages 8-10 of RFC 904.  Briefly, a Start event
			causes an Idle peer to begin neighbor acquisition
			and a non-Idle peer to reinitiate neighbor
			acquisition.  A stop event causes a non-Idle peer
			to return to the Idle state until a Start event
			occurs, either via egpNeighEventTrigger or
			otherwise."
	::= { egpNeighEntry 15 }

	-- 1.3.6.1.2.1.8.6
	egpAs OBJECT-TYPE
		SYNTAX INTEGER
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The autonomous system number of this EGP entity."
	::= { egp 6 }

	-- 1.3.6.1.2.1.10
	transmission OBJECT IDENTIFIER ::= { mib-2 10 }

	-- 1.3.6.1.2.1.11
	snmp OBJECT IDENTIFIER ::= { mib-2 11 }

	-- 1.3.6.1.2.1.11.1
	snmpInPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of Messages delivered to the
			SNMP entity from the transport service."
	::= { snmp 1 }

	-- 1.3.6.1.2.1.11.2
	snmpOutPkts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages which were
			passed from the SNMP protocol entity to the
			transport service."
	::= { snmp 2 }

	-- 1.3.6.1.2.1.11.3
	snmpInBadVersions OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages which were
			delivered to the SNMP protocol entity and were for
			an unsupported SNMP version."
	::= { snmp 3 }

	-- 1.3.6.1.2.1.11.4
	snmpInBadCommunityNames OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages delivered to
			the SNMP protocol entity which used a SNMP
			community name not known to said entity."
	::= { snmp 4 }

	-- 1.3.6.1.2.1.11.5
	snmpInBadCommunityUses OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Messages delivered to
			the SNMP protocol entity which represented an SNMP
			operation which was not allowed by the SNMP
			community named in the Message."
	::= { snmp 5 }

	-- 1.3.6.1.2.1.11.6
	snmpInASNParseErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of ASN.1 or BER errors
			encountered by the SNMP protocol entity when
			decoding received SNMP Messages."
	::= { snmp 6 }

	-- 1.3.6.1.2.1.11.8
	snmpInTooBigs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			`tooBig'."
	::= { snmp 8 }

	-- 1.3.6.1.2.1.11.9
	snmpInNoSuchNames OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			`noSuchName'."
	::= { snmp 9 }

	-- 1.3.6.1.2.1.11.10
	snmpInBadValues OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			`badValue'."
	::= { snmp 10 }

	-- 1.3.6.1.2.1.11.11
	snmpInReadOnlys OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number valid SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			`readOnly'.  It should be noted that it is a
			protocol error to generate an SNMP PDU which
			contains the value `readOnly' in the error-status
			field, as such this object is provided as a means
			of detecting incorrect implementations of the
			SNMP."
	::= { snmp 11 }

	-- 1.3.6.1.2.1.11.12
	snmpInGenErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			delivered to the SNMP protocol entity and for
			which the value of the error-status field is
			`genErr'."
	::= { snmp 12 }

	-- 1.3.6.1.2.1.11.13
	snmpInTotalReqVars OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of MIB objects which have been
			retrieved successfully by the SNMP protocol entity
			as the result of receiving valid SNMP Get-Request
			and Get-Next PDUs."
	::= { snmp 13 }

	-- 1.3.6.1.2.1.11.14
	snmpInTotalSetVars OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of MIB objects which have been
			altered successfully by the SNMP protocol entity
			as the result of receiving valid SNMP Set-Request
			PDUs."
	::= { snmp 14 }

	-- 1.3.6.1.2.1.11.15
	snmpInGetRequests OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Request PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
	::= { snmp 15 }

	-- 1.3.6.1.2.1.11.16
	snmpInGetNexts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Next PDUs which have
			been accepted and processed by the SNMP protocol
			entity."
	::= { snmp 16 }

	-- 1.3.6.1.2.1.11.17
	snmpInSetRequests OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Set-Request PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
	::= { snmp 17 }

	-- 1.3.6.1.2.1.11.18
	snmpInGetResponses OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Response PDUs which
			have been accepted and processed by the SNMP
			protocol entity."
	::= { snmp 18 }

	-- 1.3.6.1.2.1.11.19
	snmpInTraps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Trap PDUs which have
			been accepted and processed by the SNMP protocol
			entity."
	::= { snmp 19 }

	-- 1.3.6.1.2.1.11.20
	snmpOutTooBigs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			`tooBig.'"
	::= { snmp 20 }

	-- 1.3.6.1.2.1.11.21
	snmpOutNoSuchNames OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status is
			`noSuchName'."
	::= { snmp 21 }

	-- 1.3.6.1.2.1.11.22
	snmpOutBadValues OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			`badValue'."
	::= { snmp 22 }

	-- 1.3.6.1.2.1.11.24
	snmpOutGenErrs OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP PDUs which were
			generated by the SNMP protocol entity and for
			which the value of the error-status field is
			`genErr'."
	::= { snmp 24 }

	-- 1.3.6.1.2.1.11.25
	snmpOutGetRequests OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Request PDUs which
			have been generated by the SNMP protocol entity."
	::= { snmp 25 }

	-- 1.3.6.1.2.1.11.26
	snmpOutGetNexts OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Next PDUs which have
			been generated by the SNMP protocol entity."
	::= { snmp 26 }

	-- 1.3.6.1.2.1.11.27
	snmpOutSetRequests OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Set-Request PDUs which
			have been generated by the SNMP protocol entity."
	::= { snmp 27 }

	-- 1.3.6.1.2.1.11.28
	snmpOutGetResponses OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Get-Response PDUs which
			have been generated by the SNMP protocol entity."
	::= { snmp 28 }

	-- 1.3.6.1.2.1.11.29
	snmpOutTraps OBJECT-TYPE
		SYNTAX Counter
		ACCESS read-only
		STATUS mandatory
		DESCRIPTION
			"The total number of SNMP Trap PDUs which have
			been generated by the SNMP protocol entity."
	::= { snmp 29 }

	-- 1.3.6.1.2.1.11.30
	snmpEnableAuthenTraps OBJECT-TYPE
		SYNTAX INTEGER
		{
			enabled(1),
			disabled(2)
		}
		ACCESS read-write
		STATUS mandatory
		DESCRIPTION
			"Indicates whether the SNMP agent process is
			permitted to generate authentication-failure
			traps.  The value of this object overrides any
			configuration information; as such, it provides a
			means whereby all authentication-failure traps may
			be disabled.
			
			Note that it is strongly recommended that this
			object be stored in non-volatile memory so that it
			remains constant between re-initializations of the
			network management system."
	::= { snmp 30 }

END